Description
Stellar White 24×48 satin porcelain tile has a soft white background with light ivory shading and fine, pale veins. The clouding gives the surface depth even where there is little veining. Some veins trace a long, delicate line across the face, while others fade into the ivory. Daylight catches the smooth satin finish in a gentle sheen that leaves these details visible.
The rectangular format gives the floor a clear direction. Laid in a straight stack with the long edges parallel to a sofa or a kitchen island, the tiles draw the eye along the room. Rotating repeated faces end to end varies the placement of the veins while preserving the alignment of the joints.
Made in Spain with rectified edges, Stellar White pairs with pale cabinetry and warm wood. Matching ivory grout keeps the joints discreet, allowing the soft shifts between white and cream to carry across the floor.
Large-format porcelain tile requires proper substrate preparation, handling, mortar coverage, leveling, and grout-joint planning. For best results, review our detailed installation guide before beginning your project.
Read Our Detailed Tile Installation Guide
Where to Use This Tile, and How Tile Finishes Work
Porcelain tile can be suitable for most interior and exterior floor and wall applications when properly selected and installed over a suitable substrate using appropriate setting materials, grout, and waterproofing where required. Under ANSI A137.1, porcelain tile has a water absorption rate of 0.5% or less.
In showers and other wet areas, porcelain tile is widely used, but the tile and grout alone do not create a waterproof installation. Proper substrates, setting materials, waterproofing systems, and grout should be selected according to the installation conditions and TCNA guidelines.
When slipperiness is a concern, the tile’s intended-use classification and DCOF performance should be considered under ANSI A326.3. Slip resistance alone does not determine safety; water, slope, contaminants, walking speed, and intended use also affect surface conditions.
For exterior areas exposed to direct sunlight, tile color and heat absorption should be considered, along with manufacturer recommendations for exterior use. Movement joints should also be incorporated where required in accordance with TCNA EJ171. Grout-joint width should follow the tile manufacturer’s recommendations and ANSI A108.02 rather than relying on one universal joint size..
Similar tiles to consider
-
Warm White Concrete Look Tile
REGULAR
$69.24 / box
$3.90 / sq ft
MEMBER
$63.90 / box
$3.60 / sq ft
-
Concrete Look Tile
REGULAR
$95.84 / box
$5.99 / sq ft
MEMBER
$76.64 / box
$4.79 / sq ft
-
Limestone Look Tile
REGULAR
$108.35 / box
$6.99 / sq ft
MEMBER
$85.10 / box
$5.49 / sq ft
-
Minimalist Light Beige Tile
REGULAR
$123.85 / box
$7.99 / sq ft
MEMBER
$100.60 / box
$6.49 / sq ft
We Specialize in Large Format Tiles. You Can Discover Much More.
There are no reviews yet.