Description
Sequoia Natural 9×47.5 wood look porcelain tile combines soft brown and beige tones with grey undertones, creating the weathered timber appearance shown in the room setting. Pale grain, flowing lines and scattered knots give the surface a relaxed, natural character.
Made in Spain, this porcelain plank has a matte finish and rectified edges. The 9×47.5 format follows the wood grain along each tile, while its muted colour works with cream upholstery, natural wood furniture and warm neutral interiors.
Each box contains 4 tiles and covers 12 sq. ft. Sequoia Natural belongs to the Sequoia family, alongside Sequoia White, a lighter greyish beige option.
Large-format porcelain tile requires proper substrate preparation, handling, mortar coverage, leveling, and grout-joint planning. For best results, review our detailed installation guide before beginning your project.
Read Our Detailed Tile Installation Guide
Where to Use This Tile, and How Tile Finishes Work
Porcelain tile can be suitable for most interior and exterior floor and wall applications when properly selected and installed over a suitable substrate using appropriate setting materials, grout, and waterproofing where required. Under ANSI A137.1, porcelain tile has a water absorption rate of 0.5% or less.
In showers and other wet areas, porcelain tile is widely used, but the tile and grout alone do not create a waterproof installation. Proper substrates, setting materials, waterproofing systems, and grout should be selected according to the installation conditions and TCNA guidelines.
When slipperiness is a concern, the tile’s intended-use classification and DCOF performance should be considered under ANSI A326.3. Slip resistance alone does not determine safety; water, slope, contaminants, walking speed, and intended use also affect surface conditions.
For exterior areas exposed to direct sunlight, tile color and heat absorption should be considered, along with manufacturer recommendations for exterior use. Movement joints should also be incorporated where required in accordance with TCNA EJ171. Grout-joint width should follow the tile manufacturer’s recommendations and ANSI A108.02 rather than relying on one universal joint size..
Similar tiles to consider
We Specialize in Large Format Tiles. You Can Discover Much More.