Description
Resin Avorio 36×36 matte porcelain tile offers a creamy white base with the delicate surface movement of handcrafted resin floors. Its light tone feels soft rather than stark, making it an adaptable choice for many interior styles.
The 36×36 square format creates a balanced grid while allowing the restrained resin design to remain the focus. Compared with concrete look tile, the effect is quieter and more subtle, with gentle shifts in tone instead of strong pattern.
Made in Italy, Resin Avorio has a matte finish and rectified edges. The 36×36 size is packed two tiles per box, covering 18 sq ft. Avorio is also available in 24×48 and 48×48, while Resin Beige adds a light, warm beige alternative to the family.
Large-format porcelain tile requires proper substrate preparation, handling, mortar coverage, leveling, and grout-joint planning. For best results, review our detailed installation guide before beginning your project.
Read Our Detailed Tile Installation Guide
Where to Use This Tile, and How Tile Finishes Work
Porcelain tile can be suitable for most interior and exterior floor and wall applications when properly selected and installed over a suitable substrate using appropriate setting materials, grout, and waterproofing where required. Under ANSI A137.1, porcelain tile has a water absorption rate of 0.5% or less.
In showers and other wet areas, porcelain tile is widely used, but the tile and grout alone do not create a waterproof installation. Proper substrates, setting materials, waterproofing systems, and grout should be selected according to the installation conditions and TCNA guidelines.
When slipperiness is a concern, the tile’s intended-use classification and DCOF performance should be considered under ANSI A326.3. Slip resistance alone does not determine safety; water, slope, contaminants, walking speed, and intended use also affect surface conditions.
For exterior areas exposed to direct sunlight, tile color and heat absorption should be considered, along with manufacturer recommendations for exterior use. Movement joints should also be incorporated where required in accordance with TCNA EJ171. Grout-joint width should follow the tile manufacturer’s recommendations and ANSI A108.02 rather than relying on one universal joint size..
Similar tiles to consider
We Specialize in Large Format Tiles. You Can Discover Much More.